From 4ac860a65762811ffaf9773131b3a6f3d79c4b1e Mon Sep 17 00:00:00 2001
From: CheongK <54100609+CheongKoo@users.noreply.github.com>
Date: Mon, 9 Aug 2021 22:02:43 +1000
Subject: [PATCH] Update README.md

---
 README.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/README.md b/README.md
index efb8d3e..eb6ae29 100644
--- a/README.md
+++ b/README.md
@@ -7,7 +7,7 @@ Get power generation from ZeverSolar Inverter and present it to front end as a s
 ![Image of Gauge](https://github.com/CheongKoo/HA_AppDaemonZeverSolarSensor/blob/master/images/Generated%20power%20gauge.png?raw=true)
 
 **Notes:**
-1) Application is written for AppDaemon 3.
+1) Application is written for AppDaemon 4. (I have modified it for AppDaemon 4 but I can't really remember all the steps.)
 2) This will supersede my other project [HA_AppDaemonZeverSolar](https://github.com/CheongKoo/HA_AppDaemonZeverSolar) 
 as that project uses MQTT. This is a simpler implementation and has no reliance on MQTT.
 3) No changes need to be made to configuration.yaml as the component will appear to the Hass front end once it runs.
@@ -15,7 +15,7 @@ as that project uses MQTT. This is a simpler implementation and has no reliance
 5) Reading is updated every 2 minutes (and this can be easily changed in the code).
 
 **To implement this sensor:**
-1) Install AppDaemon 3.
+1) Install AppDaemon 4.
 2) Configure AppDaemon and make sure that you can run the helloworld application.
 3) Download this code and put it into the "/config/appdaemon/apps/" folder in your Hass.IO device.
 4) In the code, you need to change the IP address to your ZeverSolar Inverter "zeverSolarURL".