Update README.md
parent
bcf7d7d400
commit
4ac860a657
|
@ -7,7 +7,7 @@ Get power generation from ZeverSolar Inverter and present it to front end as a s
|
|||
![Image of Gauge](https://github.com/CheongKoo/HA_AppDaemonZeverSolarSensor/blob/master/images/Generated%20power%20gauge.png?raw=true)
|
||||
|
||||
**Notes:**
|
||||
1) Application is written for AppDaemon 3.
|
||||
1) Application is written for AppDaemon 4. (I have modified it for AppDaemon 4 but I can't really remember all the steps.)
|
||||
2) This will supersede my other project [HA_AppDaemonZeverSolar](https://github.com/CheongKoo/HA_AppDaemonZeverSolar)
|
||||
as that project uses MQTT. This is a simpler implementation and has no reliance on MQTT.
|
||||
3) No changes need to be made to configuration.yaml as the component will appear to the Hass front end once it runs.
|
||||
|
@ -15,7 +15,7 @@ as that project uses MQTT. This is a simpler implementation and has no reliance
|
|||
5) Reading is updated every 2 minutes (and this can be easily changed in the code).
|
||||
|
||||
**To implement this sensor:**
|
||||
1) Install AppDaemon 3.
|
||||
1) Install AppDaemon 4.
|
||||
2) Configure AppDaemon and make sure that you can run the helloworld application.
|
||||
3) Download this code and put it into the "/config/appdaemon/apps/" folder in your Hass.IO device.
|
||||
4) In the code, you need to change the IP address to your ZeverSolar Inverter "zeverSolarURL".
|
||||
|
|
Loading…
Reference in New Issue